Characteristics
Machinery
Our machinery and equipment come from the Finnish company Elematic, the leading supplier of the prefabricated concrete industry.
Pre-stressing
One of the first production operations is to lay and pre-stress the wires and cables. There are two different materials that can be used: 7 9.3 – 13 mm wire pre-stressed strands and 5 mm wires. The tension of each strand is between 1100 and 1300 mpa and the strands are all stressed at the same time. The number and position of the strands depends on the cross section of the panel and the desired load capacity.
De-tensioning
The pieces are de-tensioned between 8 and 20 hours after filling the casting bed, once the concrete reaches a resistance of 35 mpa.
Extrusion Systems
This gives high compacting and it is ideal for manufacturing large edged slabs.
Cutting
The slabs are cut to order after de-tensioning. A diamond disk is used for cutting. The saw usually travels across the casting bed.
Stock
Once the slabs are cut, they are placed on a horizontal platform, supported by wooden separators aligned in the air to prevent the slab coming into contact with the ground.
Quality, Experience and Guarantee

Over 10 years of experience and cutting edge Technology to offer Quality in compliance with the latest industrial standards and regulations.

Our facilities are currently located on the Las Eras Industrial Estate, with an area of over 40,000 m2. We have the very latest technology for making top quality products, hence living up to the expectations of our customers and complying with the latest building industry standards and regulations.

News

OFFICE
TECHNICAL

Our technical office, with its team of engineers and architects, offers you the chance to develop your project integrally with our staff, who are highly trained in all aspects of the design, structure calculations and the planning required to assemble our prefabricated components, which simplifies the on-site work for our customers and saves on costs.